Finger Cots

Excessive powder has been removed by a mechanical tumbling process. for use in situations where particles are not so critical, but product protection from skin oils, salt and perspiration is essential. 10 gross to a polybag, 20 polybags per case (200 gross/case).

• Mechanically Cleaned, Low Powder Finger Cots.
• Color: White.

Sizes Available:

• Small (10 Gross / Bag)
• Medium (10 Gross / Bag)
• Medium/Large (10 Gross / Bag)
• X-Large (10 Gross / Bag)

Average surface resistivity is 10/sq.and average decay charge rate is less than 2 seconds. For use with CLASS 2/CATEGORY B static sensitive device with a threshold sensitivity above 1000V, packaged in an electro-static shield bag for more protection from static charges. 5 gross to a polybag. 40 polybags per case(200 gross/case).

• Antistatic Powder Free, Class 100 Finger Cots.
• Color: Pink.

Sizes Available:

• Small (5 Gross / Bag)
• Medium (5 Gross / Bag)
• Medium/Large (5 Gross / Bag)
• X-Large (5 Gross / Bag)

Processed by advanced chlorination washing to minimize contamination both inside and outside. Inspected and packaged under class 100 specifications. 10 gross to a polybag, 20 polybags per case(200 gross/case).

• Powder free, Class 100 finger Cots.
• Color: Ember.

Sizes Available:

• Small (10 Gross / Bag)
• Medium (10 Gross / Bag)
• Medium/Large (10 Gross / Bag)
• X-Large (10 Gross / Bag)

Excellent tactics sensitivity for static free handling of ESD parts and components, 2x 10/sq. Average surface resistivity allows rapid bleed off of any charge. For use with CLASS 1/CATEGORY A( less than 1000V) static sensitive electronic devices. Packed in an electro-static bag for more protection from static charge. 5 gross to a polybag, 40 polybags per case (200 gross/case).

• Static Dissipative Finger Cots.
• Color: Black.

Sizes Available:

• Small (5 Gross / Bag)
• Medium (5 Gross / Bag)
• Medium/Large (5 Gross / Bag)
• X-Large (5 Gross / Bag)

RoHS Compliant, recommended for use with Class II static sensitive devices (thresholds above 1000V). Washed, powder-free 3 mil latex; ISO 5 (Class100) cleanroom processed and packaged in ESD-safe inner bags. Each pack is double-bagged in nitrogen-flushed TrayPaks and immobilized to prevent charge generation.

• Applications: ESD-sensitive areas, Defense, avionics, marine electronics, consumer electronics, IC manufacturing, wire bonding, repair stations, assembly areas.
• This product contains natural rubber latex which may cause allergic reactions.

Sizes Available:

• Small (5 Gross (720 each)/TrayPak)
• Medium (5 Gross (720 each)/TrayPak)
• Large (5 Gross (720 each)/TrayPak)
• X-Large (5 Gross (720 each)/TrayPak)

ISO 5 (Class 100) Fingercots. For cost effective protection from skin salts, oils and particulates. Proven latex formulation completely eliminates contamination risks to your products from silicone oils and plasticizers. Lowest ionics/extractables; particulates measured by IES-RP-CC005. Washed, powder-free, textured, tissue weight, rolled, nominal 2 3/4″ length, 3 mil latex. ISO 5 (Class 100) cleanroom processed and double bagged in stackable TrayPaks for easy storage and dispensing; nitrogen-flushed for maximum freshness at point of use.

• Applications: Discrete components, hard drive assemblies, die bonding, wire attach, disk drives, thin film heads, optics, finishing, cleaning and handling of precision instruments.
• This product contains natural rubber latex which may cause allergic reactions.

Sizes Available:

• Small (5 Gross (720 each)/TrayPak)
• Medium (5 Gross (720 each)/TrayPak)
• Large (5 Gross (720 each)/TrayPak)
• X-Large (5 Gross (720 each)/TrayPak)