Modular Cleanroom Systems in Buford, GA

The right systems. Properly specified. Correctly installed.

UltraPure Technology supplies and installs modular cleanroom systems for businesses in Buford, Georgia. A cleanroom is only as reliable as the systems behind it. The wall panels, ceiling grid, fan filter units, HVAC controls, and flooring all have to work together to maintain your required cleanliness class consistently, day after day. Getting those systems right from the start is what we do.

Our headquarters in Suwanee, just minutes south of Buford on I-85, keeps us close to your facility for system selection, installation, and long-term support. Since 1993, we have worked with many modular cleanroom system brands and component types across Georgia. That breadth of experience means we are not tied to one manufacturer, and we can recommend the system that actually fits your process rather than the one that is easiest for us to sell.

Buford’s manufacturing base includes companies in electronics, advanced materials, life sciences, and precision manufacturing, each with different cleanroom system requirements. We understand those differences and bring the right level of technical knowledge to every project.

modular cleanroom cost

The Systems That Make a Cleanroom Work

A modular cleanroom is not a single product. It is a collection of systems that have to be correctly specified and integrated for the room to perform. Understanding what each system does, and why it matters, helps you make better decisions about your project.

Wall Panel Systems

Wall panels form the physical envelope of your cleanroom. Materials such as steel, aluminum, FRP, and laminate each have different characteristics for cleanability, chemical resistance, and long-term durability. The right choice depends on your ISO class, what is handled inside the room, and how frequently the walls will be cleaned or exposed to chemicals.
 

Ceiling Grid Systems

The ceiling grid is the structural platform that supports your fan filter units, lighting, utilities, and any overhead equipment. It forms a sealed barrier above the cleanroom and must be designed to carry the load of your filtration system without compromising the room’s air containment.
 

Fan Filter Units

Fan filter units, or FFUs, are the heart of your cleanroom’s air quality system. Each FFU draws air through a HEPA or ULPA filter and delivers clean, filtered air back into the room. The number of FFUs, their placement in the ceiling grid, and the filter grade are all determined by your ISO class and the air change rate your process requires.
 

HVAC and Pressure Control

HVAC systems regulate temperature, humidity, and room pressure relative to adjacent spaces. Positive pressure keeps contaminants out; negative pressure keeps them in. Getting the HVAC system right is critical for both contamination control and energy efficiency, and it must be designed alongside, not after, the rest of the cleanroom.
 

Doors, Windows, and Interlocks

Every entry point in a cleanroom is a potential contamination risk. Doors, windows, and pass-through chambers are selected and positioned to minimize that risk, with options including sliding doors, swing doors, air curtains, and interlock systems that prevent both doors from opening at the same time.
 

Flooring Systems

Cleanroom floors need to be seamless, chemical-resistant, easy to clean, and in some environments, anti-static. Common options include vinyl sheet flooring, epoxy coatings, and conductive or dissipative finishes for environments where static discharge is a concern.
 

Monitoring and Controls

Many cleanrooms benefit from environmental monitoring systems that track particle counts, temperature, humidity, and pressure in real time. These systems provide the data you need to maintain compliance, catch problems early, and document that your cleanroom is performing as required.

How We Select and Install Your Systems

1. Site Review

We visit your Buford facility to evaluate the space, review your ISO requirements, and understand the process the cleanroom will support.

2. System Specification

We specify the wall, ceiling, filtration, HVAC, and flooring systems that match your cleanliness class, budget, and facility.
 

3. Procurement and Lead Time Management

We order components and manage supplier lead times to keep your project on schedule.
 

4. Installation

Our certified crew installs all systems on site, with full-time oversight and coordination of any subcontractors involved.
 

5. Commissioning and Testing

We commission the systems, test airflow, particle counts, pressure, temperature, and humidity, and verify the room meets its required ISO class.
 

6. Documentation and Handover

We provide test results and system documentation, walk you through the finished cleanroom, and remain available for future upgrades or service.

Brand-Independent Expertise

Many cleanroom contractors are tied to a single system brand. That can limit your options and lead to systems being recommended because they are easy to install, not because they are the right fit. UltraPure Technology works with many modular cleanroom system brands and component types. We specify systems based on your requirements, not our supply agreements.

That independence also means we can work with existing systems on retrofit and expansion projects. If you already have a cleanroom, we can assess what you have, identify what needs to change, and integrate new components without requiring a full replacement.

cleanroom contamination control

Industries We Serve in Buford

We specify and install modular cleanroom systems for a wide range of industries operating across Buford and the broader Gwinnett and Hall County area.

Why Buford Businesses Choose UltraPure

  • Headquartered in Suwanee, minutes from Buford on I-85.
  • Experience across many cleanroom system brands and component types.
  • Certified, trained personnel on site throughout the installation.
  • Reliable subcontractors who keep the project on schedule.
  • Familiar with Gwinnett and Hall County permitting requirements.
  • Full attention to system integration, engineering, and code compliance.
  • Available for ongoing support, upgrades, and future expansion.

Start Your Custom Modular Cleanroom in Buford

Planning a modular cleanroom system project in Buford, GA? Contact UltraPure Technology today. We are just down I-85 in Suwanee and are happy to visit your facility, review your requirements, and recommend the right systems for your process.

Phone: 1-800-932-0309

Email: info@ultrapuretechnology.com

Headquarters: 325 Brogdon Road, Suwanee, GA 30024

Branch Office: Naples, FL

Frequently Asked Questions

We work with many brands of modular wall panels, ceiling grids, and fan filter units. We are not tied to a single manufacturer, which means we recommend systems based on your project requirements, not a supply agreement. If you have an existing brand preference or an existing system we need to integrate with, we can work with that too.

System selection starts with your ISO class and your process. From there, we work through the implications for wall type, filtration level, air change rate, HVAC configuration, and flooring. We do this assessment during the design phase, before any components are ordered, so the system is right before installation begins.

HEPA filters capture 99.97 percent of particles at 0.3 microns and are used in most standard cleanroom applications. ULPA filters are more efficient, capturing 99.9995 percent of particles at 0.12 microns, and are used in stricter environments such as semiconductor fabrication. The right choice depends on your ISO class and the nature of the work inside your cleanroom.

Yes. We frequently work on existing cleanrooms to upgrade filtration, replace wall panels, expand the ceiling grid, or improve HVAC performance. Because we are brand-independent, we can assess what is already in place and integrate new components rather than replacing the whole system.

Not always. Some modular cleanrooms tie into your building’s existing HVAC system, while others require a dedicated system, depending on your ISO class and the degree of temperature, humidity, and pressure control needed. We evaluate this during the system specification phase and recommend the most efficient approach for your facility.

Most cleanrooms require periodic re-testing to maintain their ISO certification. The frequency depends on your industry and the standards you operate under. Some environments are tested quarterly, others annually. We can advise on the re-testing schedule appropriate for your class and application.

Most installations require building permits and engineering approval for HVAC and fire suppression systems. Buford spans Gwinnett and Hall Counties, so requirements may vary based on your facility’s location. Our team manages the permitting process and is familiar with both counties.